SY Electronics HDBT-ARC-100 SET Video Extender
Product Description
The SY-HDBT-ARC-100-SLIM-SET is a combination of the SY-HDBT- ARC-100-SLIM-T and SY-HDBT- ARC-100-SLIM-R HDBT transmitter / receiver pair. Allowing Video, Audio and control to be sent down one single CAT 6 (preferred) up to a maximum of 100m.
This SET can broadcast 4K UHD HDMI up to 100m or 1080p up to 150m.
With its Bi-directional RS232 port this long-range extender will pass through all control signals, which can be used for control of the remote display from the source end, and/or for controlling the source from the display end.
The transmitter provides outputs for both Toslink (S/PDIF) and stereo analogue for audio and the receiver has an audio Toslink fibre input port.
Key Features
- The transmitter provides outputs for both Toslink (S/PDIF) and stereo analogue for audio and the receiver has an audio Toslink fibre input port.
- This extender set can also use the HDMI audio return channel (ARC) from the display, and send it all the way through back to the HDBT-ARC100-T transmitter where the audio can be connected to an amplifier using either the analogue stereo (L+R) or optical Toslink output ports on the transmitter unit.
- Also included is an Ethernet data port on the transmitter unit for extending a LAN data network to the Receiver which has 3x Ethernet ports.
- HDCP compatible for versions 1.4 to 2.2
- The HDBT-ARC-100-SLIM extender has PoC (Power over Cable) system, which means a single PSU from either the Transmitter or the Receiver can power the set, saving cost and installation time.
- These extenders will suit a wide range of applications in the AV industry, digital signage and at home.
- HDMI 2.0 4K2K up to 100m or 1080p up to 150m
- Max resolution: 4K2K @ 60Hz 4:2:0 - Supports 1080p 3D
- Supports CEC and ARC
- Support for HDMI 1.4 and HDCP 1.4 & 2.2
- HDBaseT port provides PoC, so only one PSU is required to power both units
- Bi-directional IR and RS232 control
- Ethernet switch – 1 port on ARC100-T
- Ethernet switch – 3 ports on ACR100-R
- Status LEDs for Power, HDMI/HDCP mode, Link status and unit operating status
- Only one 12V DC power supply required (at the Transmitter or Receiver)
Product Code
Product Name
Add to Basket