AdderLink Infinity ALIF 2020 DVI Dual Head KVM TX & RX
Product Description
As part of the ADDERLink INFINITY range, ADDERLink INFINITY ALIF 2020 is a high performance KVM Transmitter & Receiver that enables you to connect to the AdderLink Infinity Manager for a completer KVM over IP KVM Matrix Switch with unlimited number of computers and user stations
The ALIF1002 DVI Dual Head, single link DVI USB 2.0 KVM transmitters and receivers provide pixel perfect video with minimal lag across to an unlimited distance over your local area network
This KVM extender can be used as a point-to-point extender, or integrated into a wider KVM matrix system when combined with the Adderlink Infinity Manager
Key Features
- The AdderLink INFINITY makes use of multiple video encode technologies devised by Adder to deliver the very best picture available. Adder encoding systems are spatially lossless, with 1:1 pixel mapping, so the digital video you receive is the same as the digital video leaving the remote computer.
- The AdderLink INFINITY uses optimal spatially lossless compression techniques to minimize network bandwidth usage and maximize the user experience. In most usage scenarios, with typical computer desktop applications, the AdderLink INFINITY uses remarkably little bandwidth. When it needs to deliver full screen motion video, it has the capability to process full screen moving video in real time.
- The AdderLink INFINITY uses optimal spatially lossless compression techniques to minimize network bandwidth usage and maximize the user experience. In most usage scenarios, with typical computer desktop applications, the AdderLink INFINITY uses remarkably little bandwidth. When it needs to deliver full screen motion video, it has the capability to process full screen moving video in real time.
- The AdderLink INFINITY enables you to Connect any USB human interface device from mice and keyboards through to graphics tablets, jog shuttles, joysticks and 3D explorers. Furthermore, most other USB devices can also be attached, such as Mass Storage devices. Most USB devices fall into a selection of USB device classes, specific types of USB device class can be enabled or disabled from your AdderLink INFINITY network. In secure environments for example, you may wish to ban the use of Mass Storage devices, this is a simple procedure through the A.I.M. System.
- You can configure your network topology to best suit your needs. If you simply want to extend one computer Tx to one user Rx, you can do so by connecting both Tx and Rx units via a low cost CATx cable. Distance is not limited - a standard network cable will deliver IP traffic up to 100 metres away. If you want to go further, simply add a network switch in to achieve an additional 100 metres. This can be done many times if you wish.
- The AdderLink INFINITY network is assumed to be a private network which you manage. As such, you can control maximum data rates generated by each Tx unit to ensure absolute stability.
- Because of the efficient manner in which AdderLink INFINITY constructs data for IP transmission, it is perfectly reasonable to make use of standard off the shelf wireless routing to connect either Rx or Tx units to your network. Typical desktop applications (word processing, datasheet etc) will use very little bandwidth.
- The AdderLink INFINITY units can be rack mounted, desktop mounted, wall mounted or attached to the back of your monitor using an optional VESA mounting carriage.
- The AdderLink INFINITY features full DVI connectivity. DVI delivers native digital video signals from your computer to your digital panel (LCD for example) without the need to convert signal types from the digital domain. By delivering native digital video throughout the AdderLink INFINITY network, you can be assured of accuracy on each and every pixel.
- The AdderLink INFINITY uses USB 2.0 (20 Mbs) connectivity to interface with your keyboard and mouse, and any other peripheral you wish to use. USB is the most broadly used computer peripheral interface standard available.
- AdderLink INFINITY delivers crystal clear stereo audio digitally across the network. This ensures continuous fidelity and channel separation between the Tx and Rx units, or even in Multicast environments.
- RS232 can be passed between the units to a maximum baud rate of 115,200. RS232 is a point to point connection technology and cannot be multicast.
Product Code
Product Name
Add to Basket
Related Products
Adder Infinity Manager KVM Matrix over IP
The Adder Infinity Manager device is an IP control suite which transforms AdderLink Infinity IP KVM extenders into a IP KVM digital matrix switch solution
View product
Adder DVA
Adder DVA active converter: VGA to DVI up to 1920x1200 resolution with EDID support
View product